Home > Products > Bluetooth Speaker
 


Model No： YK-BTS5-PB2

Specification
Output power 5W (RSM).
Loudspeaker unit 53MM inner magnetic dangling edge loudspeaker
Frequency response range 50 – 18 kHZ
Version of Bluetooth 3.0+
Frequency 2402－2480GHZ
MIC sensitivity - 38db
Degree of distortion <1％-2%
Receiving distance 10－30M
Charging voltage DV 4.8－5V
Battery capacity 2200mA
Functions characteristics
    Basic functions of the product
  1. Charge mobile phone and other digital devices (portable mobile power).
  2. Support extended playing of TF card.
  3. Built-in audio card which provides ISDN (integrated services digital network) input playing.
  4. AUX audio input.
  5. MP3 audio output.
  6. Automatically play from breakpoint.
  7. Quick charge technology.
  8. Wireless Bluetooth stereo playing.
  9. One key answering or hanging up voice communication through Bluetooth.
  10. Reverse control by Bluetooth player.
  11. Super-long standby.

Graphical representation
  1. Power Indicator.
  2. TF card slot.
  3. AUX audio input.
  4. Volume - or switching to last or next song .
  5. Charging port.
  6. Earphone jack for MP3.
  7. On-off button, play or suspend button.
  8. Volume + switching to last or next song.
  9. M model switch button.
  10. Charging Indicator.
  11. Sound output hole.
  12. Electric output port.

Packaged accessories
  1. The package contains.
  2. 1 smart robot speaker .
  3. 1 User Manual.
  4. 1 high speed power cable for MINI-USB.

Operation Steps
  1. Introduction and operation of function buttons
    2. On-off button
    Long press On-off button for 2-3 seconds to start up or shut off the device. Short press this button to display or suspend.
    + and - buttons
    Long press +\- button to adjust volume. Short press it to switch to last or next song.
    M model button
    Short press M model button to switch required models for Bluetooth, audio card, audio input, and TF card (Notice: When the speaker works in Bluetooth model, short press M model button to answer calls and short press it again to shut off the call when receive a phone call. Please short press M model button twice to call back.)
  2. Playing of MP3 songs from TF card
    3. Firstly, ensure the capacity of memory card is 1-16G (the best internal storage is FAT 32 digit form, and MP3 songs are built-in), insert TF card into the card slot, and start up the speaker. The speaker will identify and play songs automatically.
  3. Built-in audio card which provides ISDN (integrated services digital network) input playing
    4. Take out the USB cable for charging which is equipped randomly, connect the small port of the cable to the mini charging port in right part of the speaker, and connect the large port of cable to the USB interface of a computer. Long press On-off button for 2-3 seconds to automatically charge the speaker and connect audio card of the computer, and realize the simultaneous charging and playing (as to the drive and installation, the computer will tell to automatically install a new hardware. Open the player in the computer after driver being installed automatically. In ISDN model, press model button to freely switch to other audio models).
  4. AUX model input playing
    5. After starting up, take up 3.5mm audio cable which is to be connected to device, insert one side of the cable to the speaker, and another side to a player (mobile phone, MP3, IPAD, PC and so on). The speaker will switch to AUX input model playing automatically.
  5. MP3 output model
    6. After starting up, take up 3.5MM audio cable which is to be connected to device, insert one side of the cable to the speaker, and another side to earphones. And then, the sound signal will be input to earphones or connected to a loudspeaker.
  6. Wireless Bluetooth Playing
    7. After starting up, Bluetooth model is defaulted when TF card is not inserted.Connection: Start up a mobile phone, open the Bluetooth search function of the mobile phone, and match the mobile phone with “DINGDANG”. A warning tone, which shows the successful connection, will be heard after being successfully matched. Then songs in the matched Bluetooth device will be played.
  7. One button answering of calls through Bluetooth
    8. If you receive calls when you are playing songs of Bluetooth device or under the model of successful connection, this product will read out phone numbers of callers. Short press M button to answer the call, and short press it again to shut off. If you want to call back, press this button twice to call back the last phone number. A high definition microphone is built in. You can speak just by aligning to the speaker.
  8. About charging
    9. This product adopts quick charge technology which charges 500mA per hour. With the function of mobile power, this product owns relatively large built-in capacitance, and can be fully charged in 4 -5 hours. The lightning marks in two side ears of the robot will twinkle when the speaker is charged. The twinkling stops and keeps bright when the speaker is fully charged.


Cautions
    Matters need attention
  1. Do not use the product in severe environment, including moist, high salinity, heavy dust, high temperature, and freezing polar regions which will decrease performance of this product.
  2. Do not clean the surface by chemical agent. Clean the surface with soft fabric.Please do not disassemble speaker by yourself. Please place the device in shady, cool and dry place when it will be not in use for a long time .
  3. To prolong the service life of the battery, please charge the speaker with charging adapters which conform to national standards.
  4. To achieve the best tone effect, please use high definition MP3 audio files if possible.
  5. Charge this device once every three months when it will be not in use for a long time.